The MPB 414 is a replacement model for the MPB 405 wet waste compactor.
The 414 portable Wet Waste Compactor for skip lift/chain lift vehicles from Bergmann is perfect in situations where moderate volumes of high moisture-content waste is produced. This is typically food or food by-product waste. Unless the Compactor is fully sealed, this type of waste will produce odours and seepage of fouled water or effluent.
Container capacity ranges from 8-12m³. The most popular model is the Bergmann MPB 414 SN/10
Bergmann’s Wet Waste Compactors are fully sealed, including the doors, guaranteeing to eliminate seepage and minimise odours.
And once the Compactor is full, indicated by a warning light, the Compactor is simply taken away for emptying.
The pendulum blade keeps the charge box clean and the design ensures cleanliness without the accumulation of refuse deposits on the outside. Therefore there are no cleaning hatches to be maintained. The MPB can be continuously charged, because the packer blade passes under the waste that has been thrown in on its return cycle, pushing it into the bin on its forward cycle.
Optimum Compaction is achieved, while the operation noise generated by the MPB is extremely low. The cone shaped container makes it easier to empty. Years of experience and constant improvement has resulted in the combination of the most economical net weight with great strength. The MPB is fitted with a robust hydraulic unit
A range of accessories are available when ordered with the machine including: watertight finish, hydraulic 75% and 100% full signals, drainage plug, key switch instead of a start button, integrated pinion and comb lift bin lifts and bin lid openers and special RAL paint.
MPB Wet Waste Compactor in action:
For further information on this or any other Bergmann products, please contact us.
|Model||Bergmann MPB 414 SN/10 (chain / skip lift)|
|Container Capacity (m³)||9.8|
|Loading Aperture Capacity (m³)||2.0|
|Press Capacity per cycle (m³)||0.65|
|Cycle time (sec)||14|
|Cylinder thrust (kN)||246|
|Operating Pressure (bar)||180|
|Blade face pressure(N/cm²)||25.7|
|Total weight (kg)||2920|
|Loading aperture height (mm)||1974|
|Loading aperture length (mm)||1023|
|Loading aperture width (mm)||1400|
|Electrical Data||5.5kW, 400V 50Hz 3 phase connector CEE-Form 32 A(5 x 2.5mm²) TUV, GS, CE|